金凤现货供应电缆ZR-FV-1KV5X10平方电缆孟冬

金凤现货供应电缆ZR-FV-1KV5X10平方电缆孟冬

RVVSP shielded twisted-pair cable, used in the field lines, electrical instrumentation, telecommunications, broadcasting, anti-theft alarm system, building intercom system, video monitoring system, electronic e and automation devices such as shielding line. (transmission RS485 signals /) our factory new micro sales letter, micro signal: QQ is not convenient to micro letter contact! Conditions of use 1: using temperature (℃) : - 40 ~ 60 + 2: relative humidity: 98% at 40 ℃ 3: install the laying temperature is not low, such as: 15 ℃ 4: allowed minimum bending radius: indoor is not less than five times, 10 times outdoor structure 1:2: tinned copper wire line core PVC insulated/twisted-pair cable 3: film around the package/tin copper wire mesh grid block 4 PVC sheathed rated voltage: 300 v / 300 v, 300 v / 300 v with a standard: GB/T5023-1997 RVVP cable series: Can achieve 2 core to 24 core, line diameter has: 0.5, 0.75, 1.0, 1.5, 2.0, 2.5, 4.0, etc. (zr-rvvsp flame retardant),(nh-rvvsp fire resistance),(wdz-rvvsp low smoke halogen free) special model can be produced as required
　　多芯电缆线芯截面为35mm2及以下者，其线芯应为圆形，线芯截面在50mm2及以上者为扇形、瓦形或半圆形。四芯电缆中第4芯（中性线芯）可为圆形或扇形。五芯电缆中性线可为圆形或瓦型6mm2及以下者允许由单根导体构成，10mm2及以上者由多根单线组成。

Purpose: the self-supporting non-filled cable is suitable for the urban and township telecommunication lines of local telecommunication network, and also for the special network lines connecting to the public network. It is economical and practical to use the same outer protective layer for hoisting line and cable. The mechanical and electrical properties of the cable remain unchanged under conditions of 30~C - 60~C. Structure: wire: annealed bare copper wire, copper wire diameter is 0. 4, 0. 50, 0. 60, 0. 70, 0. 80, 0. 90 mm. Insulating material: high density polyethylene or ethylene-propylene copolymer. The color of the insulated wire is in accordance with the full chromatographic standard. Pair of insulated wires: two different colored insulated wires are twisted in pairs according to different pitch and are identified by a specified chromatographic combination. Core structure: with 25 pairs as the basic unit, more than 25 pairs of cables are assembled according to the unit, each unit is wired with the unit of specified chromatogram to identify different units. 100 pairs or more of cables plus 1% of the reserve pair. Core tape: wrap with a polygrease film tape. Shielding: the two sides are overlapped with or without corrugated metal strip, beyond the cable core of the longitudinal capsule. The plastic film coated on the surface of the shielding belt and the bonding sheath of the protective layer: black low density polyethylene. Hoisting line: the hoisting line is 7 strands of galvanized steel strand, nominal outside diameter is 6. 3 and 4 mm. The tensile strength of two types of 75mm is not less than 3000kg and 1800kg respectively. The suspension wire is coated with thermoplastic paint to prevent the steel wire from corrosion. Identification and length marking

　　(2)耐火电缆大多用作应急电源的供电回路，要求火灾时正常工作。由于火灾时环境温度急剧上升，为保证线路的输送，降低压降，对于供电线路较长且严格限定允许电压降的回路，应将耐火电缆截面至少放大一档。(3)耐火电缆不能当作耐高温电缆使用。



Flame retardant grade: D for fire temperature: 815 ℃ or higher for fire time: 20 min into a bundle of cable laying nonmetallic material volume: acuity 0.5 litres/m carbonized height: 2.5 meters or less self-extinguishing time: 1 h or less.

2016年4月，某变电站主变检修恢复送电时，对1号主变充电时，未退出220kV线路（主二保护屏）“15LP14（PSL631A）充电过流保护投入”、“15LP2（PSL631A）充电及过流保护跳闸”两块压板，导致220kV断路器充电保护躲不过主变励磁涌流而造成220kV线路断路器跳闸。2017年3月31日，某220kV变电站220kV断路器保护（CSC-122B）的“过流保护跳闸出口Ⅰ”和“过流保护投入”两个过流保护压板处于投入状态，在线路复电完成后，开展对侧电厂的主变复电时出现励磁涌流，过流保护（断路器保护过流Ⅰ段）动作出口跳闸。

　　七：基本电缆规格及结构参数线芯*标称截面(mm2)导体结构(根数*直径)(B/R)mm电缆大外径(mm)参考重量(kg/km)YVFRYVFRPYVFRYVFRP1*2.551*0.254.0-72-1*482*0.256.0-95-1*6123*0.257。

　　煤矿用阻燃控制电缆1、产品执行标准：MT2、用途：本产品适用于交流额定电压u0/u为450/750V及以下的控制监控回路及保护线路和配电装置中电器仪表的连接线。4、使用特性：电缆导体的长期允许工作温度为70℃，电缆敷设温度应不低于0℃。
　　矿用通信电缆型号以及用途：MHYVP：煤矿用聚乙烯绝缘编织屏蔽聚氯乙烯护套通信电缆，用于电场干扰较大的场所作信号传输，适用于固定敷设MHY32：煤矿用聚乙烯绝缘钢丝锴装聚氯乙烯护套通信电缆，用于平巷，竖井或斜井作主信号传输MHYVR：煤矿用聚乙烯绝缘聚氯乙烯护套通信软电缆，用于矿场作普通信号传输，可。

　　具体区别方法：看网线截面，如果是铜色的话，就是铜丝，如为白色，则是用合金以次充好。合金一般比较脆，容易断，而且导电性远不如铜丝，很容易在工程施工中造成问题。线材一般那建议选择标准的485线，其为屏蔽双绞线，传输线不是像网线那样为单股的铜丝，而是多股铜丝绞在一起形成一根线，从而即使某根小铜丝断掉，也不会影响整个的使用。



Armoured communication cable armoring cable type: HYA53, HYAT53, HYA23 HYAT23, HYV22, HYA22 (rat, buried) armoring communication cable USES: armoured communication cable mechanical protective layer can be appended to the structure of the cable, with the mechanical strength of the cable, antierosion capability, is vulnerable to mechanical and designed and vulnerable to erosion area telephone cable. Any kind of laying can be adopted, which is more suitable for direct buried laying in rock area. Armored communication cable structure: 1. Basic cable: any filled and unfilled cable with single sheath or double sheath structure. 2. Armored communication cable mechanical protection layer: type 53 adopts 0.15mm thick corrugated steel belt, which is longitudinal wrapped on the basic cable and overlapped on both sides. The surface of the steel belt is coated with plastic to prevent corrosion and water intrusion. The type 23,22 has similar performance with double steel band wrapping. 3. Armored communication cable sheath: black high-molecular weight low-density polyurethane or polyurethane sheath. Sheath thickness may depend on the basic cable outer diameter. 5. The marking contents of armored communication cables include: wire diameter, number of wire pairs, cable model, length, manufacturer name and year of manufacture. 6. Armored communication cable electrical characteristics: the cable meets all the electrical re of the basic cable. 6. Cable length: mechanically protected cable is made according to the length of the corresponding basic cable

　　普通网线UTP、STP，严格来说也是不能满足RS485协议的传输要求。撇开网线的机械强度、耐环境性能不说，只说电性能，一般网线的特性阻抗通常为100欧姆，而RS485要求的匹配阻抗必须在120欧姆以上（个别的如ProfiBus则达到150欧姆）。

使用高压验电器必须穿戴高压绝缘手套、绝缘鞋、并有专人监护。在使用验电器之前，应首先检验电器是否良好、有效，还应在电压等级相适应的带电设备上检验报警是否正确，方能到需要接地的设备上验电，禁止使用电压等级不对应的验电器进行验电，以免现场测验时得出错误的判断。要对线路逐相进行验电，对联络用的断路器或隔离开关或其他检查设备验电时，应对其进出线两侧各相分别验电。对同杆架设的多层电力线路进行验电时，先验低压，后验高压，先验下层，后验上层。

Call communication cable product features low cable of rated voltage: the minimum working temperature is not lower than 500 v low cable - 40 ℃. The highest long-term low cable allows working temperature: polyethylene insulation is not higher than 70 ℃; Cross-linked polyethylene insulation is not higher than 90 ℃. Low cable temperature: the minimum 0 ℃. Preheat if below minimum laying temperature. 's main electric cable performance: (l) 20 ℃ conductor dc resistance: 0.75 was no more than 26 / km; 2.0 was no greater than 9.8 Ω/km (2) 20 ℃ when the cable insulation resistance: 0.75 was not less than 300 m Ω • km; 2. Om Ω • Omm2 not small to 10 km. (3) voltage test between cable core and cable core, and between wire core and shield through ac 2500V/5min. (4) the working capacitance of the cable set shall not exceed 100pF/m when the test frequency is 1kHz. (5) the capacitance imbalance of the cable set shall not be greater than 250pF when the test frequency is lkHz and the cable length is 250Im. The combustion characteristics of the ending cable



　　KYJVP铜芯聚氯乙烯绝缘聚氯乙烯护套控铜线编织屏蔽控制电缆。KYJVRP铜芯聚氯乙烯绝缘聚氯乙烯护套控铜线编织屏蔽控制软电缆。KYJVP2铜芯聚氯乙烯绝缘聚氯乙烯护套铜带屏蔽控制电缆。KYJVRP2铜芯聚氯乙烯绝缘聚氯乙烯护套铜带屏蔽控制软电缆。