ZR-RS4852X2X24AWG阻燃电缆格双江工厂直销HYV2220X2X0.5铠装室外通信电缆春节

ZR-RS4852X2X24AWG阻燃电缆格双江工厂直销HYV2220X2X0.5铠装室外通信电缆春节

　　自承式电缆结构：导线：退火裸铜线，铜线直径为0．32，0．4，0．50，0．60，0．70，0．80，0．90mm。绝缘材料：高密度聚乙烯或乙／丙共聚物，绝缘线的颜色符合全色谱标准。绝缘线对：二根不同颜色的绝缘线按不同的节距扭绞成对，采用规定的色谱组合以便识别。



Propane burner plane with the flame of 750 ℃ and contact sample, sample in the compulsory blowing (5 m3 / min air emissions, wind speed 0.9 m/s), must be in vertical flame combustion is not up to 20 minutes, cable within 2.5 meters flame spread out on his own. IEC60332 is divided into A, B, C and D to evaluate the flame retardant performance.

　　MHYVP（1×21×42×23×24×25×26×28×210×2?）×7/0.30、7/0.37、7/0.43、7/0.52聚乙烯绝缘聚氯乙烯护套煤矿用信号电缆，用于电场干扰较大的场所作信号传输，可用于固定敷设。

　　JKTRYJ软铜芯交联聚乙烯绝缘架空电缆用于变压器引下线。JKLYJ/Q交联聚乙烯绝缘轻型架空电缆用于架空电力传输等场所。JKLGYJJKLGYJ/Q钢芯铝绞线交联聚乙烯绝缘架空电缆用于架空电力传输等场所，并能承受相当的拉力。



Application: this product is suitable for fixed installation in mine, roadway, etc., as the main line of communication and connecting line between the junction box and telephone. HUVV copper core PVC insulated polyvinyl chloride of mine telephone cable laying in mine, general to wring type polyethylene insulated PVC sheathed in communication cable model name CPEV -s ground type polyethylene insulated PVC sheathed local communication cable

另外，通过对事故情况的调查，我们也发现，很多维修电工习惯性违章的都是存在侥幸心理的。在日常的维修工作中，他们为了节约时间、节约体力或者是节约成本就会进行违规操作，并且在多次的实践中都没有出现问题，他们就会产生侥幸心理，认为，无论是哪次操作都不会出现问题，但事实上，危险和事故就这样产生了。可以说，维修电工习惯性违章在很大程度上是源于他们的侥幸心理。为了解决这个问题，就需要用人单位不断对维修电工强调侥幸心理的危害，强调按照规章制度进行安全操作的重要性，要使每一个维修员工都能认识到，虽然违章行为不一定会发生事故，或者是很可能不会造成事故，但生命是无价的，生命是不可复生的，如果因为自己的侥幸心理造成违章操作，造成的损失是很难弥补的。

　　五：代号名称和含义表2项目代号说明阻燃特性ZR分A、B、C级阻燃系列代号K控制电缆绝缘材料F聚全氟乙丙烯(F46)高工作温度200℃可溶性聚四氟乙烯(PFA)高为260℃(型号前加ZR192)护套材料F聚全氟乙丙烯(F46)高工作温度200℃可溶性聚四氟乙烯(PFA。

Purpose: the self-supporting non-filled cable is suitable for the urban and township telecommunication lines of local telecommunication network, and also for the special network lines connecting to the public network. It is economical and practical to use the same outer protective layer for hoisting line and cable. The mechanical and electrical properties of the cable remain unchanged under conditions of 30~C - 60~C. Structure: wire: annealed bare copper wire, copper wire diameter is 0. 4, 0. 50, 0. 60, 0. 70, 0. 80, 0. 90 mm. Insulating material: high density polyethylene or ethylene-propylene copolymer. The color of the insulated wire is in accordance with the full chromatographic standard. Pair of insulated wires: two different colored insulated wires are twisted in pairs according to different pitch and are identified by a specified chromatographic combination. Core structure: with 25 pairs as the basic unit, more than 25 pairs of cables are assembled according to the unit, each unit is wired with the unit of specified chromatogram to identify different units. 100 pairs or more of cables plus 1% of the reserve pair. Core tape: wrap with a polygrease film tape. Shielding: the two sides are overlapped with or without corrugated metal strip, beyond the cable core of the longitudinal capsule. The plastic film coated on the surface of the shielding belt and the bonding sheath of the protective layer: black low density polyethylene. Hoisting line: the hoisting line is 7 strands of galvanized steel strand, nominal outside diameter is 6. 3 and 4 mm. The tensile strength of two types of 75mm is not less than 3000kg and 1800kg respectively. The suspension wire is coated with thermoplastic paint to prevent the steel wire from corrosion. Identification and length marking
　　二、执行标准：Q/SD007—1998三、电缆的型号、名称和使用条件型号名称使用条件ia-K2YV本安型PE绝缘，PVC护套二芯绞合屏蔽控制电缆1、固定敷设在室内、电缆沟或管道中；2、电缆的工作温度：-20℃~+65℃；3、电缆的敷设温度不低于0，弯曲半径不小于电缆外径的10倍；4、额定电压450/。


Local cable USES manufacuring HYA, HYAT, HYAC, HYPAT, HYPA and HYA53 HYAT53, HYPA53 HYPAT53 type cable is designed for main telephone switching area, relay telephone cable, manufacuring HYA, HYAT, HYPA and HYPAT is mainly used for pipe laying, also can be used for overhead, but need to disconnect; HYAC only applies to overhead, no need for suspension lines or hooks; The HYA53, HYPA53, and HYPAT53 cables provide the mechanical strength and corrosion resistance of the cables. They can be laid in any way, which is more suitable for direct burial in rock areas. The operating temperature is -30 ~60 degrees.

　　三、电气特性：额定电压：U0/U300/300V/300/450V测试电压:U3000V执行标准：符合德国VDE、GB。弯曲半径：8.0-7.0×电缆外径温度范围：移动安装：-15℃～+80℃我们生产的高柔性电缆、耐弯曲性能好抗扭动，价格明显优于同类进口产品，是替代进口产品的选择。

Fire retardant soft structure cable for communication e room (power line of communication e) Computer cable DJVPV DJVVP, DJYVP DJYJVP, DJYPV, DJYJPV, DJVPVP, DJYPVP, DJYJPVP, JVV, JVVP DJYPRV lights with cable JDYJY - 2 kv 1 x6 lights with cable DJ - JDKR - 500 - v 1 x2. 5 1 x4

plc只是一种二次编程开发的应用控制器，它只是基于嵌入式系统而开发出来的应用层产品，从这个角度而言，它并不要求编程的人有很多语句语法的造诣，甚至对结构化也没有太多要求，与其说它的编程是写软件，还不如说是一种电工画图的思路用电脑来整理，所以它和电工线路是息息相关的，要想学好PLC，应该要从基础的继电器电路入手，至少要做一名初级的电工。硬件动手是根本，别奢望别的电工给你全部接好线，设计好硬件电路图，然后单单让你来学编程，这样你很难理解PLC的精髓所在。

　　NH-VV23NH-VLV23聚氯乙烯绝缘双钢带铠装聚乙烯护套耐火电力电缆PVCinsulatedsteeltapearmouredPEsheathpowercableNH-VV32NH-VLV32交联聚乙烯绝缘细圆钢丝铠装聚氯乙烯护套耐火电力电缆PVCinsulatedthinsteel。

1. Ac rated voltage: U. /U (V series: 600/1000v, K series: 450/750v, B series: 450/750v) 2. The cable is the highest working temperature for a long time (1) the ene poly ethylene insulated and sheathed 坲 : 70 ℃ and 105 ℃ of two; Cross-linked polyethylene insulation: 90 ℃; (2) the fluorine plastic insulation and sheath: 220 ℃ and 260 ℃. 105 ℃ flame retardant poly (vinyl fluoride and fluorine plastic insulation sheath: 90 ℃ and 125 ℃. (3) low smoke low halogen flame retardant PVC insulated and sheathed: 70 ℃; Low smoke zero halogen flame retardant insulation and sheath: 90 ℃ and 125 ℃. 3. The lowest temperature: (1) flame retardant PVC insulated and sheathed: fixed installation - 40 ℃; The fixed installation - 15 ℃; (2) the fluorine plastic insulation and sheath: fixed installation - 60 ℃; The fixed installation - 20 ℃; 4. Cable temperature safety should not be below 0 ℃.



　　(4)为降低电缆接头在火灾事故中的故障机率，在安装中应尽量减少接头数量，以保证线路在火灾中能正常工作。如果需要做分支接线，应对接头做好防火处理。RVV全称聚氯乙烯绝缘聚氯乙烯护套软电缆。RVV电缆字母所代表含义字母R代表软线字母V代表绝缘体聚氯乙烯（PVC）RVV电线是弱电系统常用的线缆，其芯线根数不定，两根或以上，外面有PVC护套，芯线之间的排列没有特别要求。

　　接地引出线要求采用我镀锡编织铜线，和电缆铜带连接时应用铬铁锡焊，不宜用喷灯封焊，以免烧损绝缘。 ③三相铜带屏蔽应分别与地线相连，注意屏蔽接地线和钢铠接地线应分别引出，相互绝缘，焊接地线的位置应尽量靠下。