ZR-KVVRP32潜江MHYV电缆新格春意

ZR-KVVRP32潜江MHYV电缆新格春意

　　吊线和电缆用同一外护层，经济实用，安装敷设方便HYAC电缆HYAC索道通讯电缆HYAC自承式通讯电话线HYAC钢绞线电缆市内通信电缆执行标准：YD/THYA市内通信电缆（广泛使用于城域网通信网络建设中，以架空和管道安装为主，主要传输音频信号）HYAT填充式通信电缆（使用于城域网通信网络建设中，以管道。



　　HYA22：铜芯实心聚烯烃绝缘挡潮层聚乙烯护套钢带铠装聚氯乙烯护套市内通信电缆。HYA23：铜芯实心聚烯烃绝缘挡潮层聚乙烯护套钢带铠装聚乙烯护套市内通信电缆。HYAT22：铜芯实心聚烯烃绝缘填充式挡潮层聚乙烯护套钢带铠装聚氯乙烯护套市内通信电缆。

　　产品标准GB参照IEC227标准电缆通过IEC332-3《电线电缆成束燃烧试验》，其中ZRC型电缆通过IEC332-3C类成束燃烧试验（C类即应使可燃材料总体积为1.5L/M，火焰持续燃烧时间为20min）；ZRA型电缆通过IEC332-3A类成束燃烧试验（试样应可燃材料总体积为7L/M，火焰持续燃。

　　塑料绝缘和护套耐火电力电缆一、产品特点及用途：本产品具有较高的耐火性能，在火焰燃烧情况下，一定时间内不发生短路和断路故障。因此，当火灾发生时能在一定时间内，能保障关键部位正常供电，有利于灭火及减小损失。



Integrated stranded railway cable GB/ t2476-1993. Railway cables are suitable for transmission under rated voltage ac 500V or dc 1000V and below. Product name, model, specification and scope: plastic insulation and polyurethane sheath railway cable PTYAH; PTYA; PZYA; PTYV; PTYY,; PTY22; PTY23; (PZY02; PZY03; PZY23 PZY22) 1/0.8mm (1/1.0mm) 2-48 core is suitable for railway communication, fire alarm, telegraph and other automatic devices with rated voltage ac 500V or dc 1000V or below.

模拟量数据采集值（PIWINT）转换为物理量（浮点数real）西门子plc通过采集通道采集到的值以整型（INT）型式保存在PIWx（PIW0）内，要换算为浮点型式的物理量需要经过以下两步。第一步：把INT转换为DINT，不用为为什么，就是精度精度精度。第二部：把DINT转换为REAL。这两步都很简单，。难点在于，把浮点数（REAL）转换为整形（INT），再通过PQW输出。物理量（浮点数real）转换为模拟量数据输出值（PQWINT）西门子PLC以整型（INT）型式输出模拟量（PQW0），一般的物理量都是浮点数型式，要把物理量换算为模拟量输出，需要经过以下两步。

　　2、产品标准：Q/TYL411-91《聚氯乙烯绝缘和护套信号电缆》3、产品使用特性：电缆导电线芯的长期允许工作温度应不超过+65℃。敷设时电缆的温度应不低于-5℃，弯曲半径应不小于电缆外径的10倍。4、电缆型号和名称型号名称使用范围PVV22聚氯乙烯绝缘聚氯乙烯护套内钢带铠装信号电缆敷设在室内、电缆沟中，管道内及地下。

　　芯数从2芯到24芯之间按国标分色，两芯以上绞合成缆，外层绞合方向为右向，软圆无氧铜线或镀锡无氧铜线屏蔽，广泛应用于仪器、仪表、楼宇对讲、监视监控的控制安装。SYV同轴射频电缆产品型号：SYV、SYVPVP、SYV22等。
　　电缆型号、名称、规格及用途型号名称规格用途MKYJV铜芯聚乙烯绝缘聚氯乙烯护套阻燃煤矿用控制电缆（2-14)**(0.75-2.5)铺设在室内、电缆内、管道等固定场合MKYJV22铜芯聚乙烯绝缘聚氯乙烯护套钢带锴装阻燃煤矿用交联控制电缆(7-61)*(0.75-。

Purpose of HYAT solid insulated filled cable: solid insulated filled cable is suitable for the urban telecommunication line of the local telecommunication network in the town of wuyu, and also for the special network line connecting to the public network. Mainly used for pipeline laying. The inner and outer surfaces of the cable core and the shield layer are filled with oil paste and poured to prevent water intrusion. The mechanical and electrical properties of the cable remain unchanged under conditions of 30~C - 60~C. Structure: wire: annealed bare copper wire, copper wire diameter 0. 32, 0. 40, 0. 50, 0. 60, 0. 70, 0. 80, 0. 90 (mm). Insulating material: high density polypropylene or polypropylene, colour of the insulated wire as indicated by full chromatograph. Pair of insulated wires: twist two different colored insulated wires into pairs at different pitch and use the specified chromatographic combination to identify pairs. Core structure: with 25 pairs as the basic unit, more than 25 pairs of cables are assembled according to the unit, each unit is wired with the unit of specified chromatogram to identify different units. 100 pairs of cables with more than one pair of cables plus 1% of the reserve pair, but not more than 6 pairs. The gap in the core is filled with oil paste. Core tape: wrap with a polygrease film tape. Shielding: metal strip with or without striping, which is longitudinal wrapped outside the core of the cable. Sheath: black low density polymer. Double sheathed cables can also be provided. Identification and marking: cable outer surface sexual identification mark, mark at no more than alternate 1 m intervals, tag contents are: the diameter of wire, line number, cable type, factory name and year of manufacture, marking at no more than alternate 1 m intervals to mark on the surface, but with the tag stagger. Other structures: according to the needs of users, we can provide armored cables HYAT53, HYAT55 and high frequency isolation cables YATG with strengthened mechanical protection layer.



In order to meet the needs of the market, our factory has developed shielding and flame-retardant control cables in recent years on the basis of producing ordinary plastic insulation control cables.

　　DJVP2V(R)P2-22聚氯乙烯绝缘铜带绕包分屏总屏聚氯乙烯护套钢带铠装计算机用屏蔽(软)电缆。DJVV(R)P3-22聚氯乙烯绝缘铝塑复合带绕包总屏聚氯乙烯护套钢带铠装计算机用屏蔽(软)电缆。

停电就停电，偏偏还要跳闸。以至于每次来电了都不知道——日常在家还能盯着点，要是出个差什么的，家里停电后不能自动恢复供电，冰箱里的东西岂不是全化了？之所以会发生这种情况，是因为配电箱里有一个小物件，它叫做“过欠压脱扣器”。先来看看它长啥样？它和漏电保护器的外观非常非常像，以至于很多普通用户以为它只是个漏电，却不知道自己家其实安装了过欠压脱扣器——上图中红圈部分，就是过欠压脱扣器的附件。过欠压脱扣器的作用，就是为电路提供“过压”（电压过高）和“欠压”（电压过低）保护，保护方式就是切断电源。

Power frequency withstand voltage test: the power cable should undergo no breakdown at 3500V and 5min. Control cables shall withstand 3000V and shall not be punctured for 5min. Should be subjected to 15 ℃ low temperature winding test and low temperature impact test. After the test sample surface should be no perception of visible cracks.


　　自承式电缆芯结构：以25对为基本单位，超过25吃饭的电缆按单位组合，每个单位规定色谱的单位扎带绕扎，以便识别不同的单位。100对及以上的电缆加有1%的预备对。自承式电缆缆芯包带：用聚酯薄膜带绕包。自承式电缆屏蔽：用轧纹或不轧纹金属带纵包子缆芯包带之外，两边搭接。

　　分别用ZR、ZRD、ZRDW型号表示。如编织钢丝铠装氟塑料护套表示为“94”。4．电缆允许小弯曲半径：非铠装、联锁或编织铠装电缆不小于电缆外径的6倍铜带屏蔽或钢丝、钢带缠绕铠装电缆不小于电缆外径的12倍5．阻燃特性：符合GB/T19666－2005标准，A类或B类。

At present, with the continuous development of kejiping, the flame retardant problem has gone from halogen flame retardant in the past to low halogen and non-halogen flame retardant. Companies in the development and production "of" communication power supply with the antiflaming fire-resistant flexible cable, the cable insulation and sheath using the low smoke zero halogen, high decomposition temperature and good mechanical properties of halogen-free, polymer materials, due to cable contains no halide and metal oxide, in does not produce harmful gases, and a lot of smoke, there is no cause the possibility of "secondary disasters", and it also has good mechanical properties and electrical properties, the operating requirements of cable, completely changed the deficiency of past flame retardant cable.