TC-93X1.5+3X2X0.75电缆魁梧嘉禾

特种电缆就是有特殊用途、可以在特定场合使用的电缆，比如可以耐高温，耐酸碱，防白蚁，以及在轮船飞机核电站等场合使用的电线电缆。就分类来说，它与电力、控制、计算机电缆等类别不属于同一种分类方法，也就是上列电缆中也包含有特种电缆在内。一般特种电缆都需要制定企业内控标准。

特种电缆是一系列具有独特性能和特殊结构的产品，相对于量大面广的普通电线电缆而言，具有较高技术含量、较严格使用条件、批量较小、较高附加值的特点。往往采用新材料、新结构、新工艺和新的设计计算。

　　电缆的安装与敷设：1． 电缆长期允许工作温度为-40～+50℃，月平均相对湿度为95％（+25℃时）；2． 电缆允许敷设与安装的温度应不低于-10℃；3． 电缆小弯曲半径：MHYVR型为电缆外径的10倍，其他型号为外径的15倍。

　　局用交换机电缆SBVV型电缆用于程控交换机设备间、交换局内的总配线架与交换局用户电路板之间的连接，也可用作通信设备连接.交换机电缆SBVV电缆产品说明：主要用于程控交换机设备间、交换局内的总配线架与交换局用户电路板之间的连接，也可用作通信设备之间连接。



　　4、电缆允许弯曲半径：无铠装层的电缆,应不小于电缆外径的6倍；有铠装层的电缆或带铜带屏蔽结构的电缆,应不小于电缆外径的12倍；有屏蔽层结构的软电缆,应不小于电缆外径的6倍。耐火电缆是指在火焰燃烧情况下能够保持一定时间安全运行的电缆。

掌握各类电气图的绘制特点各类电器图都有各自的绘制方法和绘制特点，掌握了这些特点，并利用他就能提高读图效率，进而自己也能设计和制图。大型的电气图纸往往不止一张，也不只是一种图，婴儿读图时应将各种有关的图纸联系起来，对照阅读。比如通过系统图，电路图早联系；通过接线图，布置图找位置；交错阅读收到事半功倍的效果。把电气图与土建图，管路图等对应起来阅读。电气施工往往与主体工程，土建工程以及其他工程，工艺管道，蒸汽管道，给排水管道，采暖通风管道，通信线路，机械设备等项安装工程配合进行。

MHYVP 2 * 3.3+2 * 0.85 data for mine shielded communication cable 1. Tin coated copper wire is used for conductor, 47/0.3 for conductor, 12/0.3 for 0.85, and 7/0.28 tin coated copper wire for drainage line. 2. Insulation color: 3.3 the wire core is a red one and a blue one, while the 0.85 wire core is a white one and a green one. The white wire core is wrapped with aluminum foil. 3. Insulation thickness: 3.3 core insulation thickness is 0.5, and the outside diameter after insulation is 3.5 mm. The insulation thickness of wire core is 0.7 and the outside diameter after insulation is 2.5mm. 4. Into line with the four wire core is arranged for red, green, blue, white, streamline, and row streamline to conductors are twisted together, don't put longitudinal, are not added when cabling filler, external use aluminum foil winding and cable core, then a layer of polyester film around the package, the outside is a layer of copper wire braided shielding (shielded copper wire tin plating). 5. Sheath: the front diameter is 8.2mm, the back diameter is 12mm (between 11.7mm and 12mm), and the sleeve is flame retardant blue

航空航天、机车车辆、能源、钢铁、有色金属冶炼、石油开采、电机、建设等领域需用耐高温电线电缆。长期连续工作温度125度、135度、150度、180度、200度、250度及250度以上的耐高温电线电缆，常用的有辐照交联聚烯烃、硅橡胶、氟树脂、聚酰亚胺、云母、氧化镁等电线电缆。现介绍；两种新型耐高温电线电缆。TC-93X1.5+3X2X0.75电缆

有强电与弱电之分，这里介绍一种强电用低感电缆。此电缆带有热耗散装置，用于各类接触焊机、电弧焊机与气动焊钳间相连接的新型水冷式低感电缆，具有结构简单合理、冷却水流通量大、不会形成堵塞阻断和限流现象、散热效果好、使用寿命长等特点。
　　小弯曲半径:无铠装电缆应不小于电缆外径的6倍;有铠装电缆应不小于电缆外径的12倍℃。三、BV电线BV线用途一般用途单芯硬导体无护套电缆，适用于交流电压450/750V及以下动力装置、日用电器、仪表及电信设备用的电缆电线。

Precautions for installation of power cables: keep 2m distance when the cable is installed in parallel with the thermal pipe, and 0.5m should be maintained when crossing. The cable shall be installed at a distance of 0.5m in parallel or across other pipelines. When the cable is directly buried and installed, the buried depth of 1-35kv cable is not less than 0.7m. When 10KV and below cables are installed in parallel, the net distance between them shall not be less than 0.1m and 10-35kv shall not be less than 0.25m. The distance of cross installation is not less than 0.5m. Cable laying temperature is not lower than 0 ℃, bending radius: multi-core cable or 15 (D + D), a single cable 20 or more (D + D), (D for cable diameter, D) for the conductor diameter. 6 kv and above cable joint: (1) installing a cable terminal head, must be stripped semiconductor electric shielding layer, operation shall not damage the insulation, should avoid mark uneven situation, when necessary use sand paper to grind; The shield end should be flat and the graphite layer (carbon particles) should be cleaned. (2) plastic cable end copper tape screened and armor must be good grounding, the short circuit also follow this principle, avoid unbalanced three-phase run ShiGang armoured end produce inductive electromotive force, and even "lighter" and accidents such as burning sheath. It is required to use my tinplate to braid copper wire for grounding lead. When connecting with the cable copper belt, it should be welded with chromium-iron tin. The shield of three-phase copper tape should be connected with ground wire respectively. Note that the shielded ground wire and steel armor ground wire should be separately drawn out and insulated from each other. The position of the welded ground wire should be as low as possible. Basic re for cable terminals and intermediate joints: a. good conductor connection; B. The insulation is reliable, and it is recommended to use irradiated cross-linked heat-shrinkable silicone rubber insulation materials; C. good sealing; D. sufficient mechanical strength to meet various operating conditions. The end of the cable must be used to prevent erosion of water and other corrosive materials, so as to prevent breakdown due to the aging of the insulation layer caused by water trees. Crane or forklift should be used for the loading and unloading of cables. It is forbidden to run flat or lay flat. For installation of large cables, cable laying cart should be used to avoid external damage or abrasion caused by manual dragging. If the cable cannot be laid in time for some reason, it should be stored in a dry place to prevent sunlight from exploding and water entering the end of the cable. Note: the installation of wire and cable should be done by the installation personnel or full-time technical personnel familiar with the performance of wire and cable. If there are still unclear matters, please consult the relevant technical department or the technical department of our factory.
CPUCPU又称处理器，它是PLC的控制中心，通过总线（包括数据总线、地址总线和控制总线）与存储器和各种接口连接，以控制它们有条不素地工作。CPU的性能对PLC工作速度和效率有较大的影响，故大型PLC通常采用高性能的CPU.存储器存储器的功能是存储程序和数据。PLC通常配有ROM（只读存储器）和RAM（随机存储器）两种存储器，ROM用来存储系统程序，RAM用来存储用户程序和程序运行时产生的数据。

这种新型低感电缆也包括电缆和电缆端头上固装着的接头，且电缆也是由正极缆芯和负极缆芯同装于外胶管中构成。由于这类低感电缆一般都是用于电压为25-50V、电流在7000-12000A之间的场合，冷却水在电缆中的短路导电现象基本上可忽略不计，所以在此低感电缆中没有使用隔离正极缆芯和负极缆芯的橡胶软管，只是特别设置了一条横断面呈轮辐状（俗称“梅花芯”状）的芯架，其“轮心”和相邻“辐条”间所围成的空间在顺轴线方向上即形成纵向沟槽，芯架上的纵向沟槽与电缆所配置的正极缆芯的总根数相同，其电缆部分就是以正极缆芯和负极缆芯分别搁于芯架的纵向沟槽内装置在外胶管中构成。正极缆芯和负极缆芯的两端头部分别同极集合成束夹固于缆芯夹中，然后固装在接头上，电缆的外胶管的端头部套装在接头的尾端部，并用套装在外胶管外的收紧箍紧密封。
一台8508A真的就能够完成55XX系列校准器的校准吗?我们必须对不同的型号做具体的分析。在5500550255205522A的维护手册中，对这些仪器的校准要求和校准方法作了详细说明。尤其是提出了各个功能的校准调整点。只有保证这些校准调整点的准确度，才能保证仪器各个功能全范围的性能。当检查仪器性能时，应该尽量包含这些校准调整点。如果发现校准器准确度下降，必须通过调整这些点来恢复仪器的准确度。

　　2、电缆长期工作温度：-20oC~65oC3、电缆敷设温度不低于0OC，弯曲半径不小于电缆外径的10倍。我公司规格从10平方—300平方防水防蚁鼠电力电缆适用于在蚁鼠危害比较严重，且有绿色环保要求的场所，特别是埋地和管道敷设的电力系统输配线路。