汾西低烟无卤WDZ-NTRVVP阻燃铠装软电缆

汾西低烟无卤WDZ-NTRVVP阻燃铠装软电缆
低烟无卤电缆，是指不含卤素（F、Cl、Br、I、At）、不含铅镉铬汞等环境物质的胶料制成，燃烧时不会发出有毒烟雾的环保型电缆。

低烟无卤电缆基本概述:● 其中卤素指针为：所有卤素的值≦50PPM(根据法规PREN 14582)● 燃烧后产生卤化氢气体的含量<100PPM(根据法规EN5067-2-1)● 燃烧后产生的卤化氢气体溶于水后的PH值≧4.3(弱酸性) (根据法规EN-50267-2-2)● 产品在密闭容器中燃烧后透过一束光线其透光率≧60%(根据法规EN-50268-2)● Pb<90PPM，Cd、Cr6+、Hg、PBBs、PBDEs均小于5PPM

低烟低卤、低烟无卤阻燃电缆特点及用途：本产品适用于交流额定电压450/750V及以下的地铁、高层建筑、商场、剧院、发电站、化学工厂、城市广场及其他公用事业等对电缆阻燃特性要求高的场合。电缆的无卤低烟、低卤低烟特性，当火灾发生时，蔓延速度慢，烟浓度低，可见度高，有害气体释放量小，便于人员撤离。

　　产品标准：Q/NHN使用特性：•交流额定电压：UO/U450/750V•电缆长期允许工作温度：-25℃~+105℃及-60℃~+200℃两种.•耐火特性:符合GB12666.6-90规定:A类:火焰温度950℃-1000℃B类:火焰温度750℃-800℃燃烧时间90min燃烧时间:90min附加电压。

Precautions for installation of power cables: keep 2m distance when the cable is installed in parallel with the thermal pipe, and 0.5m should be maintained when crossing. The cable shall be installed at a distance of 0.5m in parallel or across other pipelines. When the cable is directly buried and installed, the buried depth of 1-35kv cable is not less than 0.7m. When 10KV and below cables are installed in parallel, the net distance between them shall not be less than 0.1m and 10-35kv shall not be less than 0.25m. The distance of cross installation is not less than 0.5m. Cable laying temperature is not lower than 0 ℃, bending radius: multi-core cable or 15 (D + D), a single cable 20 or more (D + D), (D for cable diameter, D) for the conductor diameter. 6 kv and above cable joint: (1) installing a cable terminal head, must be stripped semiconductor electric shielding layer, operation shall not damage the insulation, should avoid mark uneven situation, when necessary use sand paper to grind; The shield end should be flat and the graphite layer (carbon particles) should be cleaned. (2) plastic cable end copper tape screened and armor must be good grounding, the short circuit also follow this principle, avoid unbalanced three-phase run ShiGang armoured end produce inductive electromotive force, and even "lighter" and accidents such as burning sheath. It is required to use my tinplate to braid copper wire for grounding lead. When connecting with the cable copper belt, it should be welded with chromium-iron tin. The shield of three-phase copper tape should be connected with ground wire respectively. Note that the shielded ground wire and steel armor ground wire should be separately drawn out and insulated from each other. The position of the welded ground wire should be as low as possible. Basic re for cable terminals and intermediate joints: a. good conductor connection; B. The insulation is reliable, and it is recommended to use irradiated cross-linked heat-shrinkable silicone rubber insulation materials; C. good sealing; D. sufficient mechanical strength to meet various operating conditions. The end of the cable must be used to prevent erosion of water and other corrosive materials, so as to prevent breakdown due to the aging of the insulation layer caused by water trees. Crane or forklift should be used for the loading and unloading of cables. It is forbidden to run flat or lay flat. For installation of large cables, cable laying cart should be used to avoid external damage or abrasion caused by manual dragging. If the cable cannot be laid in time for some reason, it should be stored in a dry place to prevent sunlight from exploding and water entering the end of the cable. Note: the installation of wire and cable should be done by the installation personnel or full-time technical personnel familiar with the performance of wire and cable. If there are still unclear matters, please consult the relevant technical department or the technical department of our factory.

燃烧气体的腐蚀性小，也避免了对仪器设备的损害，低卤、无卤的特性，使得电缆材料在耐老化和耐紫外线及其它辐照性能大大提高，从而延长电缆的使用寿命。低烟无卤WDZ-NTRVVP阻燃铠装软电缆

低烟无卤电缆使用特性：1.电缆额定电压UO/U:450/750V，交流聚烯烃UO/U为0.6/1KV2.电缆长期工作温度为：-20℃－90℃，-40℃－105℃3.推荐弯曲半径：无铠装电缆应不小于电缆外径的6倍，有铠装或铜带屏蔽结构的电缆应不小于电缆外径的12倍。

低烟无卤电缆主要技术指标：1.电缆应经受环境温度下工频电压试验3kV，5min不击穿2.电缆的透光率应符合下表电缆外径 D（mm）透光率（%）≥电缆外径 D（mm）透光率（%）≥D>40705<D≤105010<D≤4060D≥540 3.电缆的不延燃性（阻燃特性）:应通过GB12666.5-90中B类成束燃烧试验。单根电线电缆垂直燃烧试验应通过GB12666.2-90 4.卤酸气体释放量，符合IEC754-1 5.燃烧气体的PH值和导电率，符合IEC754-2 PH≥4.3 电导率≤10μS/mm。
上图中KMKMKM3为Y/△转换的三个交流接触器。kM1为主交流接触器，无论是Y形正常运转，它都担负传递电能的工作，必须吸合动作。kM2交流接触器在电路中只是作为Y形的O点，电机正常运行时KM2它是不动作的。KM3交流接触器是电路Y形启动后来与KM1一起吸合共同完成工作任务，形成正常的△形运转的电流通路。电机Y形降压启动时KM1吸合，KM2动作将电动机接成Y形。一般Y型启动都采用上图中的380或220V（根据动力线的情况来定，220v需有工作零线N，无零线N必须用380v继电器）的得电延时继电器。

　　生产范围：型号额定电压导体标称截面0.50.751.01.52.54610芯数ZR-KVV450/750V或OR0.6/1kv-2-612-142-10-2-612-142-10-2-612-142-10-7-612-612-142-10-1。
Such a cable structure features: type manufacuring HYA communication cable chromatography used in high-density polyethylene polythene insulation, lu: su composite sheath (namely cable is applied to longitudinally wrap shielding ribbon and sheath bonded into an organic whole, forming sealing protection layer), has a superior electrical properties, the characteristics of the construction is convenient. Such a cable main electrical properties: 1. The dc resistance: 20 ℃, 0.4 148 or less? / km 0.5 95.0 or less? / km 0.6 65.8 or less? / km 0.8 36.6 or less? / km2. Insulated electrical strength: 1 min 1 kv no breakdown between the conductor and conductor shielding 1 min 3 kv is not breakdown (3) insulation resistance: each conductor and the rest of the grounding wire core, inflatable cable is more than 10000 m Ω. Km, filling type cable is more than 3000 m Ω. Km. 4. Working capacitance: average value: 52 + / -2nf /km5

　　一、阻燃本安安全系统用检测仪器电缆1、性能特性：a、电缆长期工作温度：70℃b、低环境温度：－40℃c、电缆敷设温度：不低于0℃d、敷设时允许弯曲半径：不小于电缆外径6倍，铠装型电缆则应不小于电缆外径的12倍e、额定电压：300/500V2、电缆的型号、名称、适用范围：型号名称适用范围ZR-B。

低烟无卤电缆代号、名称及含义：项目代号含义系列代号DLDWLDK低烟低卤低烟无卤控制电缆绝缘材料VJEF聚氯乙烯交联聚烯烃丁腈热塑体护套材料VGS聚氯乙烯热固性护套热塑性护套屏蔽材料PP2铜网或镀锡铜网铜带/塑复合带铠装材料2232钢带细钢丝导体种类ABR独股导体7股绞合导体多股绞合导体；生产范围截面(mm2)：0.5、1.0、1.5、2.5、4、6、10、16、25。

低烟无卤电缆主要用途：该产品阻燃性能优越，燃烧时烟度甚少，无腐蚀性气体逸出，广泛应用于核电站、地铁车站、电话交换机及计算机控制中心、高层建筑大楼、宾馆、广播电视台、重要军事设施、石油平台等，以及人员较集中，空气密度低的场所。

低烟无卤电线特性：(1) 抗张强度比一般PVC电线大：一般PVC电线抗张强度大于1.05Kgf/mm2，而低烟无卤电线抗张强度大于1.2Kgf/mm2；(2) 具有良好的耐候性(-30℃~105℃)；(3) 具备良好的柔软度(硬度为80—90)；(4) 具有非移性(因为此产品配方中不用添加可塑剂，故不会有移形性)；(5) 燃烧时不会产生有毒黑烟(会产生少量白色烟雾)；(6) 具有较高的体积电阻率：PVC电线一般为1012~1015Ω/cm3，低烟无卤电线大于1016Ω/cm3；(7) 具有良好的耐高压特性：PVC电线一般耐10KV以上，而低烟无卤电线高达15KV以上；(8) 具有良好的弹性和粘性。

今后遇见类似的作业，我们记得随时扪心自问：停电了吗？工作与非工作区域隔离了吗？验电了吗？接地了吗？安全交底真的交到现场作业人员心里了吗？工作负责人、业务管理人员和安全监督人员到位履职了吗？……而作为安全管理的人员，对于所用的外包作业人员，都要“当自己人”来看来管，加强横向沟通、协调和相互间资源共享，本着对安全高度敬畏、对生命高度尊重的理念，认真开展安全教育、现场勘探、安全技术交底、安全布置、安全监督检查，切实做好类似外委工程的全过程管理工作。

　　2、产品标准:GB5023、2-85《额定电压450/750V及以下聚氯乙烯绝缘电缆（电线）固定敷设用电缆（电线)》3、产品使用特性：1）额定电压U0/U分为450/750V和300/500V。2）电缆的长期允许工作温度：BV-105型……应不超过105℃；其他型号……应不超过70℃。

　　HJVVHJVVP0.4-0.8mm5芯-200芯用于配线架至交换机或交换机内部各级机器间连接等（包括农村电话局用）。4、HPVV100*2*0.5配线电缆使用特性：电缆敷设环境温度不低于-5℃。电缆的弯曲半径不得低于电缆外经的20倍。